Telli Menüü

Iga asja peale mihkel: Adjusting Pot Lights at Home

Pot lights (recessed lights) have become more and more common in the last forty years, offering even overhead lighting across rooms in a streamlined way. Pot lights don’t project downward into a room with a wire, chandelier, or lampshade, so it’s just about as close as you can get to pure light in a room.

However, their streamlined nature sometimes lacks in the ambience department that we can make up for in colour adjustment. And what happens when these lights burn out? Their tightness to the ceiling can be intimidating if you want to adjust anything after installation. But here are a few tips for working on them yourself.

1. Firstly, choose to do this during the day when you have plenty of natural light. If you can avoid wearing a headlamp to see what you’re doing, that will make this much easier.

2. For quick adjustments, turn off the wall switch of the pot lights you will be taking out. If you will be disconnecting any wiring, you should turn off electricity to that whole room or the whole house from your home’s main panel.

3. Place a secure chair or step ladder under a pot light. Take out a thin, strong, dull object like a putty knife and slide that under the outer ring of the pot light, pulling it down gently until you can see the recess hole of the pot light. Hold this with your thumb and avoid pulling it down any further. Hopefully the hole wasn’t too tightly cut, because this is where the risk of breaking ceiling plaster enters the equation.

Täismahus artikkel on loetav Eesti Elu tellijatele

Igal nädalal toome me sinuni kõige olulisemad kogukonna uudised ja eksklusiivsed lood uutelt kolumnistidelt. Räägime eestlastele südamelähedastest teemadest, kogukonna tegijatest ja sündmustest. Loodame sinu toele, et meie kogukonna leht jätkuks pikkadeks aastateks.

Hind alates $2.30 nädalas.

Vaata tellimispakette

Loe edasi